; The device name, upto 11 characters, no spaces are allowed DEVICE 295W NAME "HY" "295W" ; ;---------------------------------------------------------------------------- ; The Type of instrument, 1 & M must required for backward compatibility ; The middle number denotes the number of DMX channels used TYPE 1 24 M ; ;---------------------------------------------------------------------------- ; Mirror/Head resolution MIRROR 2 540 270 ; | | | ; | | |_______ maximum tilt movement (in degrees) ; | |____________ maximum pan movement (in degrees) ; |_________________ 1 means moving mirror, 2 means moving head ; ;---------------------------------------------------------------------------- ; Patching Information. (Upto 10 lines allowed) ; Upto 10 lines of 159 chars are allowed including formulae ; Variables used d=dmx number(1..512), h=handle(1..60), n=devicename (11-char) ; Allowed modifiers ; +,-,*,/,(,) basic arithmatic ; % means remainder after divide ; & means logical AND ; | means logical OR ; R means reverse the bits of the curernt result (operates on a byte) ; ^ means logical Exclusive OR (operates on a byte) ; > means shift to the right ; < shift to the left ; r followed by number means get the value of that parameter ; d DMX address ; n Fixture name, a 0 terminated character string ; h The handle number DEVICEADDRESS "Handle %2d"h "Fixture %11s"n "DMX %03d"d "" "" "" "" "" "" "" DAEND ; ;---------------------------------------------------------------------------- ; Specify DMX limits ; ; minimum allowed dmx number MINDMX=1 ; ; maximum allowed dmx number MAXDMX=488 ; ; DMX number must be divisible by this DIVBY=1 ; ;---------------------------------------------------------------------------- ; DMX channel description ; ; Column by column description of each DMX channel ; 1. The channels bank number (1..12) ; 2. The upper faders in the bank (1) or the lower faders in the bank (61) ; 3. Channel type (L=LTP, H=HTP, I=Instant LTP, S=16-bit instant LTP, ; s=16-bit Fadeable LTP ; 4. DMX offset (1..number of DMX channels) ; 5. The output level is proportionally recdced by this level (0..100%) ; 6. The curve number (applicable only to HTP channels), usually set to 1 ; 7. Inverted (I) or Normal (N) ; 8. Attribute type (A=Color Wheel1, BCD=Color Mix, E=Pan, F=Tilt, ; G=Iris, H=Dimmer, I=Gobo1, J=Gobo2, K=Gobo1_Rotate, L=Focus, ; M=Gobo2_Rotate, N=Color Wheel2, O=Shutter, P=Prism, Q=Zoom, ; R=Effect_Rotate, S=Frost, 0=uncategorised) ; 9. Checksum channel (Always 1) ;10. Attribute name, must be enclosed in quotes and upto 12 charcaters allowed ;11. The ON value of this channel (0..255) ;12. The Highlight level of this channel ;13. The Lolight level of this channel ; DMX 1 1 H 3 100 1N H 1 "Dimmer" 255 255 0 2 61 L 2 100 1N O 1 "Shutter" 0 -1 -1 3 1 s 12 100 1N F 1 "Tilt" 128 -1 -1 0 0 L 13 100 1N F 1 "Tilt fine" 128 -1 -1 3 61 s 10 100 1N E 1 "Pan" 128 -1 -1 0 0 L 11 100 1N E 1 "Pan fine" 128 -1 -1 4 1 I 1 100 1N A 1 "Col.Wheel1" 0 -1 -1 5 61 L 9 100 1N L 1 "Focus" 128 -1 -1 6 1 I 4 100 1N I 1 "Gobo 1" 0 -1 -1 9 1 L 5 100 1N P 1 "Prism 1" 0 -1 -1 9 61 L 6 100 1N R 1 "Prism Rot1" 0 0 0 10 1 I 7 100 1N P 1 "Prism2" 0 0 0 10 61 L 8 100 1N R 1 "Prism Rot2" 0 0 0 11 1 L 14 100 1N 0 1 "XY Speed" 0 -1 -1 14 1 H 17 100 1N H 1 "LED-Dimmer" 255 0 0 14 61 I 15 100 1N S 1 "Frost" 0 0 0 15 1 L 18 100 1N O 1 "LED-Shutter" 255 0 0 15 61 L 16 100 1N 0 1 " Reset" 0 -1 -1 16 1 L 19 100 1N T 1 "LED-Red" 0 0 0 16 61 L 20 100 1N U 1 "LED-Green" 0 0 0 17 1 L 21 100 1N V 1 "LED-Blue" 0 0 0 17 61 I 22 100 1N 0 1 "LED-XS" 0 0 0 18 1 I 23 100 1N 0 1 "LED-SCENE" 0 0 0 18 61 I 24 100 1N 0 1 "SCENESPEED" 0 0 0 END RANGE 16 ; Reset 0 99 "LnvalidArea" 100 105 "Lamp Out" 200 205 "Lamp On" 250 255 "Reset All" REND